융합 주조 멀라이트 벽돌
융합 주조 멀라이트 벽돌 are made of high-quality mullite clinker as raw material, which is melted and cast at high temperatures in an electric arc furnace.
The refractory fire bricks are characterized by dense crystal structure, high load softening temperature, 좋은 열충격 저항, high mechanical strength at room temperature and high temperature, good abrasion resistance, good thermal conductivity, and strong resistance to slag corrosion, 등. The bricks are widely used in metallurgical heating furnaces, even heat furnaces, calcium carbide furnaces, and calcium carbide furnaces. Electrofused mullite is widely used in metallurgical heating furnaces, even heat furnaces, calcium carbide furnace outlets, glass kiln walls, 등등.
PER Refractories produces standard refractory bricks and customized-shaped refractory bricks. High quality and cheap price are our advantages. You can contact us for a free quote in time.
Fused Cast Mullite Bricks Typical Physical Properies
| Al2O3 max (%) | 70-75 |
| SiO2 min (%) | 19-21 |
| Fe2O3 max (%) | 0.9-1.9 |
| Na2O max (%)a | 1.0-1.2 |
| True Specific Gravity | 3.54 g/cm |
| 냉간 분쇄 강도 | 350 Mpa |
| Thermal Expansion at 1150℃ | 0.80% |
| Thermal Conductivity at 500-1500℃ | 4.6W/m.K |
| 다공성 | 8% |
Composition of Fused Cast Mullite Bricks
Fused mullite generally includes high purity fused mullite and ordinary fused mullite. Compared with sintered fused mullite, fused mullite has coarse crystals of 1000 에게 2000. high-purity fused mullite is light gray, and ordinary fused mullite is dark gray (bauxite is the main raw material).
PER refractories factory can customize high purity fused mullite and ordinary fused mullite according to customers’ requirements. We also produce 강옥 물라이트 벽돌 및 기타 types of refractory bricks.
Fused Cast Mullite Bricks are made of high alumina isotopes, composed of different alumina (3AL203.2Si02 mass fraction of AL2O372% and Si0228%). It is melted at about 2300°C and cast in a sand mold at 1850°C, then annealed to relieve stress.
The main crystalline phase is mullite and corundum, and the glass phase is filled between the crystalline phases. It is more resistant to glass liquid erosion than sintered refractories, but not as good as other electrofused refractories.
Adding a small amount of dioxygen (7%-8.5%) can make mullite crystals smaller, brick organization dense, mullite amount increased to 60%-70%, relatively reduce the glass phase content, reduce product cracks. Fused Cast Mullite Bricks have a low coefficient of thermal expansion, good resistance to thermal vibration, and strong resistance to glass liquid erosion.
Above 1450 ℃, mullite brick should not contact with alkali substances, otherwise it will make mullite decomposition. Mullite will also decompose in the reducing atmosphere above 1370℃, and part of Si02 becomes gaseous SiO to leave the brick body.
When the temperature is higher than 1650°C, even if the atmosphere is not restored, the mullite will decompose at a lower partial pressure of oxygen.
Fused Cast Mullite Bricks are made from high alumina isotopes, and different alumina is formulated to form the composition of mullite (3AL203-2Si02 mass fraction is: AL2O3 72%, Si02 28%). It is melted at about 2300°C, poured into the sand mold at thousand 1850°C, and then annealed to eliminate stress.
The main crystalline phase is mullite and corundum, the glass phase is filled in between the crystalline phase. Its resistance to glass liquid erosion is stronger than sintered refractories, but not as strong as other electrofusion refractories.
Add a small amount (7%-8.5%) of enamel dioxide, which can make the mullite crystals become a smaller, dense brick organization, the amount of mullite increased to 60%-70%, relatively reducing the content of the glass phase, and reduce the cracks of the products.
PER 내화물 회사 소개
PER 내화물 회사 신미시에 위치, 허난성, 중국 내화물의 고향. 저희 회사는 R을 접목한 기술 기반의 내화물 기업입니다.&디, 생산, 매상, 및 기술 서비스. 국토의 풍부한 자원과 우수한 품질은 내화재 생산에 비할 데 없이 우수한 조건을 제공합니다.. 당사의 주요 제품은 내화 점토 벽돌입니다., 높은 반토 다루기 힘든 벽돌, 다루기 힘든 실리카 벽돌, 마그네슘 다루기 힘든 벽돌, 멀라이트 벽돌, 단열벽돌, 기타 고온에 강한 제품.
PER은 가장 중요한 것을 고려합니다, 우리는 모든 제품을 진지하게 받아들이고 모든 고객을 진심으로 받아들인다고 믿습니다.. 모든 고객에게 빠르고 고품질의 결과를 제공하기 위해. PER Refractories는 여러분의 가장 믿음직한 내화물 제조사이자 믿음직한 파트너가 되겠습니다..
회사소개 PER 내화물은 그린의 생산기지입니다., 에너지 절약, 친환경 신내화물. 우리 회사는 ISO9001을 통과했습니다.:2008 국제 품질 시스템 인증 및 GB/T24001-2004 / ISO14001:2004 환경 경영 시스템 인증, 기업품질 검사기관 인증. 우리의 제품은 이상에서 잘 판매됩니다 20 전 세계 국가. 그들은 야금술을 위한 선호하는 내화 제품입니다, 비철, 석유화학, 유리, 세라믹, 및 기타 내화물 산업.
