Castable Penebat Ringan
Lightweight thermal insulation castables are composed of refractory light aggregate, powder, binding agent additives, dan lain-lain. Compared with other indefinite refractory materials, the binding agent and moisture content are higher, the mobility is better, and the materials and binding agent can be selected according to the conditions of use.
It can be directly cast into the lining body and can be made into a prefabricated block by casting or vibration method. Lightweight heat insulation and heat preservation castable is easy to construct, and it is the most ideal product for the construction of alkali corrosion-resistant parts under high temperatures.
PER Refractories produces refractory castables that are widely used in high-temperature industries such as steel, simen, and petrochemicals because of their excellent insulating and heat-resistant properties.
Product Characteristics of Lightweight Insulating Castables
Lightweight heat-insulating and heat-preservation castable is easy to construct and is the ideal product for the construction of alkali corrosion-resistant parts under high temperatures. Good compatibility, strong adhesion, initial setting time and construction can be C for a long time, fast strength growth, strong seepage resistance, do not need acidification treatment, easy to ensure that the masonry mortar joints are dense and full, can significantly improve the airtightness of the chimney liner wall, integrality and corrosion resistance of the liner.
It is the ideal cementing material for a high chimney, high-temperature flue, and duct lining, and can also be used in acid-resistant ponds, tanks, and other acid-resistant projects in petroleum, kimia, non-ferrous metallurgy, dan industri lain.
Product Classification
1. Semi-lightweight refractory castables, bulk density of 1.0-1.8g/cm3.
2. Lightweight refractory castables, bulk density of 0.4-1.0g/cm3.
3. Ultra-lightweight refractory castables, bulk density of less than 0.4g/cm3.
Product Characteristics
1. High operating temperature, excellent heat insulation, and heat preservation performance.
2. Small bulk density, low thermal conductivity, reduce heat loss.
3. Good compatibility, strong adhesion.
4. Resistant to chemical erosion, and strong resistance to acidic or alkaline gases.
5. Strong overall structure of pouring whole liner, good airtightness, and certain anti-corrosion ability.
According To The Use Of Different Temperature Classification
1. Low-temperature thermal insulation (lightweight) castables tahan api, the use of the temperature of 600-900 ℃.
2. Medium-temperature heat-insulating (lightweight) castables tahan api, using a temperature of 900-1200 ℃. 3. High-temperature heat-insulating (lightweight) castables tahan api, using a temperature of 600-900 ℃.
3. High-temperature heat insulation (lightweight) castables tahan api, the use of temperature> 1200 ℃.
Product use
Lightweight refractory castables have a wide range of applications in metallurgy, machinery, petrokimia, electric power and building materials, and other industrial sectors of the kiln, thermal equipment, flue, and chimney lining. Lightweight refractory castables are commonly used as heat insulation and thermal insulation layer materials.
Low and medium-temperature lightweight castables are mainly used as heat-insulating lining, and cannot contact with flame. High-temperature lightweight castables are directly used for the working lining which is not in contact with the melt or solid medium in the furnace, and the working lining of various heating furnaces and heat treatment furnaces, which can greatly save energy consumption.
Points of Attention for Construction
When using insulation castables, the following points need to be paid attention to:
Mixing ratio: the mixing ratio of the castables is very important and should be precisely mastered according to the type of castables and the usage requirements. Improper mixing ratio may affect the performance and service life of the castables.
Construction method: The construction method of insulation castables can be chosen according to the specific situation. Biasanya, manual construction, mechanical construction, and pumping construction methods can be used. Different construction methods will affect the density and uniformity of the castables.
Maintenance: the insulation castables should be kept wet during the maintenance period, and the maintenance time is generally more than 24 Jam. During the maintenance period, it is necessary to prevent the castables from drying too early and causing cracking.
Pendek kata, the selection and use of thermal insulation castables should be carried out according to specific conditions. Users should choose the type of insulation castables suitable for themselves, and pay attention to the mixing ratio, construction methods, and maintenance issues in the process of use, to ensure its excellent thermal insulation performance and service life.
Mengenai Syarikat PER Refractory
PER Refractories Company is located in Xinmi City, Wilayah Henan, kampung halaman bahan refraktori di China. Syarikat kami ialah perusahaan refraktori berasaskan teknologi yang menyepadukan R&D, pengeluaran, jualan, dan perkhidmatan teknikal. Sumber yang kaya dan kualiti yang sangat baik di wilayah itu menyediakan keadaan unggul yang tiada tandingan untuk pengeluaran bahan tahan api. Produk utama kami ialah bata tanah liat refraktori, bata tahan api alumina tinggi, bata silika refraktori, bata tahan api magnesium, batu bata mullite, bata penebat, and other high-temperature-resistant products.
PER is considered the most important thing, we believe in taking every product seriously and receiving every customer sincerely. To provide fast and high-quality results for all our customers. PER Refractories will be your most trustworthy refractory manufacturer and reliable partner.
Syarikat PER refraktori adalah asas pengeluaran hijau, penjimatan tenaga, dan bahan refraktori baharu yang mesra alam. Syarikat kami telah lulus ISO9001:2008 pensijilan sistem kualiti antarabangsa dan GB/T24001-2004 / ISO14001:2004 pensijilan sistem pengurusan alam sekitar, pensijilan agensi pemeriksaan kualiti perusahaan. Produk kami dijual dengan baik dalam lebih daripada 20 negara di seluruh dunia. Mereka adalah produk refraktori pilihan untuk metalurgi, bukan ferus, petrokimia, kaca, seramik, dan industri refraktori lain.
